Skills for your AI assistant
Add a skill and Claude Code, Codex, Cursor or a similar assistant learns one more job.
Robotics
97 skillsSoftware, navigation, simulation and training for robots and drones.
- amc-run-video-calibration664 installsCalibrates your own recorded MP4 camera datasets through the AutoMagicCalib REST API.
- amc-setup-calibration-stack652 installsDeploys the AutoMagicCalib service and web UI with Docker Compose from NGC images.
- mujoco-playground19 installsRuns robot controllers in MuJoCo Playground simulation and transfers them to real SO-101 or YAM arms.
- motion-planning18 installsPlans collision-free arm and grasped-object paths around tabletop obstacles, containers and doors.
- check-carla-portsReports which network ports CARLA and its tools use and which are already taken.
- check-feature-supportTells you whether CARLA supports a given feature on this build and detects version mismatches.
- amc-run-sample-calibration647 installsRuns end-to-end calibration on the bundled sample dataset to verify an AutoMagicCalib install works.
- i4h-workflow-scene-edit81 installsEdits an existing robot workflow scene's assets, layout, cameras, randomization and success rules.
- i4h-lerobot-viz80 installsServes a converted LeRobot dataset in the browser so you can inspect videos and action timelines.
- i4h-workflow-e2e80 installsRuns the full workflow pipeline from recording through training to checkpoint validation.
- i4h-workflow-create77 installsCreates a minimal blank Workflow scaffold with ground, light and an idle run mode.
- i4h-workflow-dataset-replay75 installsReplays a workflow HDF5 episode through its original scene to verify trajectories and recordings.
- i4h-workflow-setup75 installsInstalls and preflights the robot workflow runtime and fixes missing components.
- i4h-workflow-dataset-annotate73 installsLabels or filters workflow HDF5 episodes as successes using an OpenAI-compatible vision model.
- i4h-workflow-dataset-mimic73 installsExpands workflow HDF5 demonstrations with action jitter to create synthetic training variants.
- i4h-workflow-dataset-convert72 installsConverts workflow HDF5 recordings into LeRobot datasets for training or browser inspection.
- i4h-workflow-finetune71 installsFine-tunes a GR00T or openpi robot task on compatible LeRobot data.
- amc-run-rtsp-calibration67 installsCalibrates cameras from live RTSP streams by recording clips and running AutoMagicCalib calibration.
- foundationpose-pipeline44 installsAdapts BOP datasets and runs the FoundationPose pipeline to evaluate and re-score pose results.
- foundationpose-setup40 installsInstalls and repairs the FoundationPose pipeline and builds its TensorRT depth engines.
- i4h-workflow-train-rl28 installsTrains, evaluates and exports robot workflow policies with RSL-RL or RLinf.
- mujoco-audit18 installsChecks a MuJoCo model for mesh, texture and physics problems and reports what to fix.
- mujoco-playground-rl18 installsCreates, trains and deploys GPU-accelerated reinforcement learning tasks for MuJoCo robots.
- blender-creation17 installsBuilds textured, articulated MuJoCo 3D models from a URL, image or text description using headless Blender.
- iteration17 installsSplits a robot manipulation task into stages, tests each with a script and reviews rollout videos.
- mujoco-studio-sidecar17 installsStreams a live, hot-reloading MuJoCo simulation into the editor's side pane for viewing.
- mujoco-showcase-shot16 installsRenders a studio-lit 360-degree turntable video and keyframe sheet of a MuJoCo model.
- share-example16 installsPackages a robot demo with transcript, files and short videos into a bundle ready to post on GitHub Discussions.
- rgb-object-localization15 installsFinds the 3D position and orientation of graspable objects using only ordinary RGB camera images.
- visual-servoing15 installsAligns a robot gripper to a target with sub-millimeter precision using camera feedback before grasping.
- fr3-duo-control14 installsBrings up, homes and controls a Franka Research 3 Duo dual-arm robot in simulation or on hardware.
- i2rt-yam-bringup14 installsInstalls the I2RT YAM SDK, sets up the CAN connection and runs a wave test on the robot arm.
- i2rt-yam-ik14 installsComputes joint angles that place the I2RT YAM robot arm at a desired position and orientation.
- sim2real-gauntlet14 installsTests a robot controller in MuJoCo under increasing perturbations before it runs on a real robot.
- sim2real-iteration14 installsGuides repeated controller tuning in MuJoCo with scene checks, episode replay and failure triage.
- so101-bringup14 installsWalks through setting up, calibrating and running a first motion on a physical SO-101 robot arm.
- so101-calibration13 installsCalibrates an SO-101 arm to a fixed camera and measures the tabletop height for grasping.
- check-ue5-limitationsLists what CARLA on Unreal Engine 5.5 cannot do compared with 5.8, so you avoid unsupported workflows.
- control-lightsTurns street, building and vehicle lights on or off and sets their colour, intensity and night cycle.
- control-spectatorMoves the spectator camera, frames an actor or follows a vehicle in third-person, first-person or top-down view.
- control-trafficTunes the Traffic Manager that drives autopilot cars: speed, following distance, lane changes, lights and determinism.
- control-traffic-lightsSets traffic lights green, red or yellow, freezes them, changes phase timing or resets the normal cycle.
- control-vehicleDrives a specific vehicle directly with throttle, steering, brake, lights, doors and physics tuning.
- create-carla-content-packBuilds a CARLA content pack of maps, props, vehicles or walkers that installs into a UE 5.8 package.
- create-leaderboard-routeCreates, edits, visualises and summarises CARLA Leaderboard route files with waypoints and scenario triggers.
- create-scenarioWrites and registers a new ScenarioRunner scenario class with its XML config, validating it without a simulator.
- create-scenic-scenarioTurns a natural-language description into a Scenic scenario file and validates it before running.
- create-sensorSpawns and attaches cameras, lidar, radar, IMU, GNSS and other sensors to actors, with ROS 2 publishing.
- debug-drawDraws debug points, lines, arrows, boxes and text labels in the CARLA world.
- debug-navmeshVisualises and validates a map's pedestrian navigation mesh by sampling and drawing walkable locations.
- document-carla-featureWrites and reviews CARLA documentation in house style, checking every claim against the code first.
- download-carlaDownloads a CARLA release package, nightly build, source checkout or Docker image and reports what was obtained.
- get-carla-additional-mapsDownloads or builds the AdditionalMaps pack and installs it into a CARLA UE 5.8 package after checking it matches.
- import-carla-mapImports a custom RoadRunner map into a CARLA source build and verifies it loads on a server.
- import-carla-propImports FBX meshes into a CARLA source build as spawnable static props and verifies them by spawning.
- import-carla-ue58-mapExplains and runs the ways to get a custom map into CARLA on UE 5.8, from build-time import to runtime OpenDRIVE loading.
- import-carla-ue58-propImports an FBX mesh into CARLA on UE 5.8 as a spawnable prop and registers it in the blueprint library.
- import-carla-ue58-walkerImports a skinned pedestrian model into CARLA on UE 5.8 as a spawnable, animating walker.
- import-carla-vehicleImports an FBX vehicle into a CARLA source build, assembles it and verifies it spawns, drives and steers.
- import-carla-walkerImports an FBX pedestrian into a CARLA source build and verifies it spawns, stands and walks.